For Businesses that already have office phone systems
PrettyMay Skype PBX Gateway can be used as a Skype trunking solution for your existing PBX phone systems, it enables all business to make and receive Skype calls without breaking the existing phone systems, simply add several Skype inbound and outbound lines to route SkypeIn calls into your phone system, and make cheap Skypeout calls from your extensions.
For Small Businesses that needs a Skype PBX phone system
PrettyMay Skype PBX Gateway also can be used as a stand-alone Skype based PBX phone system for small businesses, it offers full features that a proprietary hardware PBX / PABX includes, also supports Skype services and traditional PSTN network. It's truly affordable, easy to set up, simple to use and maintain.
Hardware
From 2 to 24 ports supported, mixing FXO and FXS interfaces, as required.
Single synchronous PCI interface for all 24 FXO/FXS ports.
Four RJ11 ports per Remora?card.
Dimensions: 2U Form factor: 120 mm x 55 mm for use in restricted chassis.
Short 2U compatible mounting clips available for installation in 2U rack-mount servers.
32 bit bus master DMA data exchanges across PCI interface at 132Mbytes/sec for minimum host processor intervention.
Autosense compatibility with 5 V and 3.3 V PCI busses.
Fully PCI 2.2 compliant, compatible with all commercially available motherboards, proper sharing of PCI interrupts.
Intelligent hardware: Downloadable Field Programmable Gate Array programming with multiple operating modes. Field upgradeable so that new features can be added when they become available.
Power: 800mA peak, operational 300 mA max at +3.3 V or 5 V.
Temperature range: 0 - 50°C.
Software
FXO port: Software AEC(Acoustic Echo Cancellation), Noise Suppression, Auto Gain Control, CallerID(FSK Type1), DTMF Tones Detection/Generation, Busy Tone/Congestion Tone Detection
FXS Port: Onhook/Offhook Detection, DTMF Tones Detection
Certifications
FCC Part 15 Class A, FCC Part 68, and EN 55022 Class A.
Technical certifications in Russia and Malaysia.
Architecture
The A200 consists of a Remora?daughterboard mounted on the AFT PCI card. The Remora card has two sockets each of which can accept a FXO-2 or FXS-2 module. Each FXO-2 or FXS-2 module supports two FXO or FXS lines, respectively.Up to five additional Remora?daughterboards can be mounted in empty slot positions beside the A200 assembly,connected to the A200 by a backplane bus connector.
Production Quality
ISO 9002
Warranty
Lifetime parts and labor on hardware. PLUS a 30-day "no questions asked" return policy. |